·

How to Keep Your Freestanding Bathtub Sparkling Clean

We’re reader-supported. This means when you buy through links on our site, we may earn an affiliate commission.

Cleaning-a-freestanding-bathtub-3

Cleaning a freestanding tub may seem daunting, but with the right approach, it can be a straightforward and satisfying task. In this article, we’ll provide valuable information and tips to keep your bathtub looking pristine and as good as new.

Key Takeaways

  • Proper cleaning methods extend the lifespan of your freestanding bathtub
  • Choose the appropriate cleaning solutions for different bathtub materials
  • Regular maintenance keeps your tub looking new and prevents damage

Cleaning a Freestanding Bathtub

Lady cleaning the outside of a white freestanding tub. In front of a red wall.

Freestanding bathtubs are a popular choice for homeowners seeking a luxurious and stylish bathroom centerpiece. However, these eye-catching tubs require regular maintenance and cleaning to keep them looking their best. With a few simple steps and the right cleaning products, you can maintain the beauty and functionality of your freestanding bathtub.

Before you begin, consider these important points:

Bathtub Materials

Know your bathtub material. Different materials require unique cleaning methods. For example, cast iron tubs need mild detergent, while acrylic tubs require a non-abrasive cleaner.

Always test cleaning products on a small, inconspicuous area first. When in doubt, consult the manufacturer’s care instructions. Try these cleaning methods:

  1. Cast iron: Use warm water and mild detergent, avoiding abrasive cleaners to prevent scratching.
  2. Acrylic: Opt for a soft cloth and non-abrasive cleaner to maintain its glossy finish.
  3. Porcelain: Use a mild abrasive cleaner, but be gentle to avoid dulling the surface.

Tub Position in The Room

Freestanding bathtubs are often placed away from walls, so it’s crucial to clean every accessible area thoroughly.

Regardless of the position, don’t neglect the underside of the tub, especially if it has decorative feet or raised detail. Use a vacuum or dust brush for hard-to-reach areas.

Clean the surrounding floor area, as water, soap, and grime can accumulate there. Use a mop or cloth and appropriate floor cleaner, ensuring to rinse any residue well and wipe dry to prevent slips.

Top Tips:

  • Tub against the wall: Since one side is against the wall, focus on cleaning the exposed surfaces and around the fixtures.
  • Center of the room: With space all around, make sure every side is spotless.

How to Make Your Tub Look New Again

Brown dog covered in soapy bubbles in a white tub with a chrome faucet set

Whether you’re dealing with a dingy old tub or simply want to refresh the appearance of your luxury, extra-large freestanding bathtub, these tips and techniques will help you achieve a sparkling, like-new bathtub without breaking the bank. Say goodbye to unsightly stains and hello to a rejuvenated bathing oasis.

1. Tackle soap scum and hard water stains

Over time, bathtubs can accumulate stains, scratches, and a dull finish that can make your bathroom feel less inviting. However, the good news is that you don’t have to invest in an expensive bathtub replacement to regain that pristine look. Follow these simple steps to get rid of stubborn patches on the tub:

  • Start by filling a spray bottle with warm water and a healthy dose of white vinegar – a 1:1 ratio should do the trick.
  • Spray on stains.
  • Leave to soak for about 30 minutes.
  • Wipe clean with a microfiber cloth.

2. Take care of the surrounding surfaces

Once your tub is shining bright, it’s time to take care of the surrounding surfaces.

  • Fill a plastic bag filled with a white vinegar solution and tie it around any hardware that needs a good polishing. This nifty trick will make your fixtures sparkle without any harsh scrubbing. Leave the bag on the faucet for 30 minutes (not more). Then remove and wipe clean with soft cloth.
  • Wipe down the exterior of your freestanding tub with a non-abrasive cleaner and a soft cloth. Be sure to dry the surface thoroughly to avoid water spots.

How to Clean Claw Feet

Antique clawfoot tub with imperial eagle clawed feet

If you’re lucky enough to have a clawfoot tub, you might be especially puzzled by how to keep the claw feet looking sparkling clean.

  1. Gather your cleaning supplies: a soft sponge, a toothbrush for those pesky crevices, mild liquid soap, and a microfiber cloth. Abrasive cleaners and rough sponges can scratch the finish on the feet, so avoid them at all costs. The particular cleaning product required will depend on the material from which your clawed feed are made.
  2. Wet the sponge and apply a small dab of liquid soap. Gently scrub the claw feet, taking extra care around intricate details. For hard-to-reach areas, employ your trusty toothbrush – it’s perfect for the job.
  3. Rinse the claw feet thoroughly using warm water, ensuring no soap residue lingers. To add that extra sparkle and shine, buff the claw feet dry with a microfiber cloth. Regular maintenance is key to preserving the beauty and integrity of your bathtub’s claw feet.

How to Clean a Jetted Tub

Aquatica Pamela HydroRelax White Jetted spa
The Pamela HydroRelax tub provides a strong back massage and fits two bathers. See it at Aquatica

You’ve had a long day, and there’s nothing more relaxing than sinking into your jetted bathtub. However, after some time, the jets can accumulate buildup, and that can take a toll on your tranquil escape. A regular and thorough cleaning routine will help keep your jetted tub looking and feeling luxurious for years to come.

Here’s how to clean your jetted tub like a pro:

  1. Fill up the bathtub with warm water to a few inches above the highest jet. Drop in a couple of tablespoons of liquid dish soap, and let it work its sudsy magic! Swirl the water around a bit to mix it up, and your cleaning solution is now ready.
  2. Turn on the jets and let them run for 15 to 20 minutes. This will allow the soapy water to circulate and clean out any gunk. Make sure to turn off the jets afterward and drain the soapy water from the tub.
  3. Once that’s done, it’s time for a rinse. Refill the tub with cold water to the same level as before and run the jets for another 10-15 minutes to flush out any remaining residue.
  4. Drain the water again and give your bathtub a quick wipe down with a soft, damp cloth.
  5. To give your jetted tub a deep clean, consider using a commercial cleaner designed specifically for this purpose. There are many great options available, so choose one that suits your needs and budget.

How to Clean Freestanding Tub Faucets

Mounted silver faucet on a freestanding tub

Cleaning the tub faucet may seem like a daunting task, but it’s actually quite simple. Clean your tub faucet regularly to keep it looking fabulous – a clean faucet completes a clean bathtub!

Follow these steps to make your freestanding tub faucet sparkling clean:

  1. Turn off the water supply and make sure the faucet is dry.
  2. Use a soft cloth dampened with warm soapy water to gently wipe the faucet’s exterior.
  3. For stubborn spots, apply a non-abrasive cleaner with a toothbrush, working gently to avoid damaging the finish. Rinse thoroughly with clean water and dry with a soft cloth.

Non-Toxic Cleaning Solutions

How to Clean Your Tub with Baking Soda

There’s no need to invest in expensive, chemical-laden cleaning products when you can make your tub gleam like new with safer, non-toxic solutions. Your beloved bathtub will thank you, and so will the environment.

Try these remedies for a hygenic, sparkling clean tub:

Baking Soda

If you’d like to avoid chemical cleaning products, try baking soda. This versatile powerhouse is effective, affordable, and eco-friendly. The mildly abrasive properties of baking soda help remove soap scum and hard water stains, and it’s gentle enough not to leave scratches behind.

Sprinkle some on a damp sponge and give your tub a good rub down, or make a paste by mixing water and baking soda, gently scrub the stained area, then rinse thoroughly. This process will help tackle those pesky stains without causing harm to your bathtub’s surface.

The below table offers cleaning solutions for various bathtub materials:

Baking Soda Cleaning Solutions

Tub MaterialCleaning Solution
FiberglassMix 2 parts baking soda, 1 part warm water
AcrylicMix 2 parts baking soda, 1 part warm water
Porcelain Enameled SteelMix ½ cup baking soda, 2 cups warm water, ¼ cup dishwashing detergent
Porcelain Enameled Cast IronMix ½ cup baking soda, 2 cups warm water, ¼ cup dishwashing detergent
Stone ResinDon’t use baking soda. See manufacturer’s instructions

Vinegar and Water

The dynamic duo, vinegar, and water, is another fantastic non-toxic solution. In a spray bottle, mix equal parts distilled white vinegar and warm water. Spray this all-natural concoction onto your tub and let it sit for at least 15 minutes to work its magic. The acetic acid in vinegar helps break down dirt and grime.

For stubborn stains, mix vinegar and baking soda to create a powerful paste. Apply it to the trouble spots and let it sit for 15-30 minutes before scrubbing it away with a sponge.

Maintenance & Routine

Regular cleaning is essential for keeping your freestanding bathtub in top condition. A well-maintained tub can be an inviting oasis in your bathroom. So, let’s dive into the maintenance routine for your freestanding bathtub.

  • Wipe down the tub after every use with a soft cloth. By doing this simple step, you’ll prevent water spots and soap scum from building up. Don’t forget to wipe the faucet and knobs too.
  • Schedule a deeper cleaning at least once a week. Use a gentle, non-abrasive cleaner that’s safe for your tub’s material and a soft sponge.
  • Avoid harsh chemicals like bleach and ammonia. These can damage the finish or even the material of your tub. Check the manufacturer’s recommendations before using any cleaner.

Other Resources

Check out our Ultimate Guide To Buying A Freestanding Tub. You might also be interested in our articles about the best bath accessories for your freestanding tub and design ideas for a freestanding bathtub.

How Important is Regular Maintenance For Freestanding Tubs?

Keeping up with routine maintenance is essential for a spotless freestanding bathtub. By following these tips, not only will your tub stay in great shape, but you’ll also ensure a relaxing, soothing bath experience every time you step in.

Tags: cleaning freestanding tubs, freestanding tub

Similar Posts